Adding recessed lighting to a room in your Gaithersburg home changes the way the space feels and functions. Whether you are retrofitting existing can lights to LED or adding new lights where there were none, Jacob and his crew plan the layout, pull the wiring through finished ceilings, and have every light on and tested before they leave.
Jacob is based right here in Gaithersburg. You are not getting someone who drives in from another county. He knows the neighborhoods, the typical home styles, and the kinds of problems that come up in homes built in the 80s, 90s, and 2000s throughout this area.
What Jacob and His Crew Handle
LED retrofit kit installation in existing recessed can housings
New recessed light installation using remodel cans in finished ceilings
Kitchen recessed lighting layout and installation
Living room and bedroom ceiling light addition
Dimmer switch installation for recessed lighting circuits
Wiring new lights back to existing switch locations
Replacement of outdated halogen or incandescent recessed cans with LED housings
When to Call
Existing recessed can lights are halogen and generate significant heat
Room has no overhead lighting and you want to add ceiling lights
Remodeling a kitchen or living room and upgrading the lighting layout
Existing recessed lights flicker or produce uneven light output
Wanting to add a dimmer to an existing recessed lighting circuit
Upgrading from old incandescent cans to modern LED throughout a room
What Affects the Cost of Recessed Lighting Installation in Gaithersburg, MD
No prices appear on this page because every job is different. Here is what determines the cost for a Gaithersburg home:
Number of lights to install or retrofit
Whether new circuit wiring is needed or existing wiring can be extended
Ceiling type and whether attic access is available above
Whether IC-rated cans are required due to insulation above the ceiling
Dimmer switch scope and number of switches in the circuit
Jacob gives you a straight quote after understanding the job. Not a ballpark. Not an estimate with asterisks. A clear number for what the job actually requires before work starts.
Frequently Asked Questions
Retrofitting LED modules into existing cans is the most affordable option. Adding new lights where there was no previous wiring requires running cable and costs more. Property Renovators Handyman Services is based in Gaithersburg, so scheduling is straightforward and he knows the area. Jacob gives you a clear breakdown after assessing the ceiling and wiring.
Remodel cans are specifically designed for installation in finished ceilings without attic access. They clip into the drywall cutout from below. Attic access makes wiring easier but is not required For installations.
IC stands for insulation contact. An IC-rated recessed can is safe for direct contact with insulation above the ceiling. A non-IC can must maintain clearance from insulation. In most Montgomery County homes with attic insulation above finished ceilings, IC-rated cans are the correct choice. Jacob verifies this before installing.
A general rule is one light for every 4 to 6 square feet of ceiling area in kitchens and task areas, and a wider 8-foot spacing in living areas and bedrooms where ambient light is the goal. Room size, ceiling height, and the trim and bulb combination all affect the final layout. Jacob plans the layout before cutting any holes.
Standard dimmers designed for incandescent loads do not work correctly with LED fixtures. LED-compatible dimmers are required for smooth dimming without flickering. Jacob installs the correct dimmer for the LED load when dimming is part of the scope.
Most residential circuits in Montgomery County homes can support several additional recessed lights. Jacob checks the circuit load before adding lights and confirms the existing wiring is adequate. If a circuit is already near capacity, he routes the new lights to a less loaded circuit.
A kitchen with six to eight new recessed lights in a finished ceiling with no attic access takes four to six hours including layout, cutting, wiring, and testing. A retrofit of existing cans with LED modules takes significantly less time.
Yes, but bathroom recessed lights must be rated for damp or wet locations depending on proximity to the shower. Jacob uses the correct housing rating for each bathroom location and verifies that the circuit has the appropriate GFCI protection.
A retrofit kit is an LED module that installs into an existing recessed can housing from below without any new ceiling work. A new remodel can replaces or adds a housing where there is none. If your existing cans are in good condition and just have outdated bulb technology, retrofit kits are the efficient upgrade.
Call Jacob directly at (301) 395-3831. Know roughly how many lights you want and which room. Property Renovators Handyman Services is based in Gaithersburg, so scheduling is straightforward and he knows the area. He serves all of Montgomery County.
Also Serving Nearby
Property Renovators Handyman Services provides Recessed Lighting Installation throughout Gaithersburg and neighboring communities:
Verified Reviews from Montgomery County Homeowners
DV
Diana Valle
April 2024
★★★★★
"Jacob is the best ever. I was extremely impressed by his expertise and he is definitely someone you can trust. It's hard to come by professionals who are also kind and Jacob is just stellar."
Google
MH
Mark H.
April 2023
★★★★★
"Jacob was pleasant to work with, understood the problem that needed to be solved, and expert at diagnosing and solving that problem. I would recommend him enthusiastically."
Angi
VC
Valery Ceasar
August 2023
★★★★★
"Jacob Mora does excellent work & is very dependable & professional."